1) Plan is to relocate the pans 10" back along with the body. Cut the pans out.

2) Move it 10" back, cutting out 10" from the back and test fitted

3) Another comparison shot, driver side stock vs relocated passenger side

5) Tunnel test fitted in it's new location.  Pedals relocated, info in bodydrop section

6) Picts of what the inside of the tunnels look when opened

4) Chassis tunnel cut as well so shifter can go back same distance as the pans & body

7) 10" used from new pans donor to extend the front part of the pan

9) Finished passengers side compared to stock driver side

9) Bottom of pans finished after a coat of RustBullet

11) With a coat of chassis black paint

10) Top picts

Note: Tunnel with the shifter and hand brake section not completed yet...