Goal: New doors.  Since the door frame has been highly modified, the doors will need to be modified.

1) Stock doors on for comparison

2) Original chopped doors on, lines drawn for the approximate new shaped needed

3) Plan is to cut the door into quarters, spot weld them into place then fill in the gaps

4) Top corner spot weled in its place, corver reangled to match the raked 'B' pillar

5) Bottom end welded into its place

6) Another corner spot welded into place

7) Donor piece used to fill in the gap in top of the door frame. 

8) Bent the bottom frame of the original door to the desired shape

9) Took a donor door, cut the skin out and drafted onto the door

10) Modified door compared to stock door

Finished for now, need to make the inner panel frame but have to put in the suicide hinges first to work around them.