1) Floor pans to be lowered the same height as the dropped body.

2) 'S' bracket fabricated as the drop for the floor pans

3) Front pans had to be tapered up to the stock height framehead

5) Both pans lowered (note that pans relocated back 10" for other body mods)

6) Pedals needs to be lowered the same amount.  Started by cutting the bottom of the tunnel

4) Passenger side lowered compared to the stock height driver side

7) Dropped tunnel boxed in and welded

8) Welded in a sandrail type pedal mount onto the new location on the tunnel

9) Better pict of the aftermarket pedal mount

10) Bottom of dropped pedal section boxed in with thick gauge metal

12) Added support bars in between the dropped pans to minimize flexing

11) How the dropped floor pans looks from the bottom

13) Chassis ready for paint

14) Chassis complete minus top of the tunnel (shifter/hand brakes area)