3) Rear view.  Note that the center hub area is missing most of it's resin

Plan: Restore old Petri banjo wheel

1) What I started off with

2) Close up picture or one of a problem area

4) Applied POR-15 two part epoxy then let dry.

5) Sanded down the epoxy and layer of old paint

6) Starting to build up the hub area

7) The hub area getting its shape after some sanding.  More resin needs to be applied to finish it off

8) Applied a small layer of epoxy on top to smooth out the ridges then sanded

9) Smoother out the rear and hub rebuilding near completion

10) Sprayed the wheel with a coat of primer.  Horn button area still needs to be rebuilt

11) Close up view of the hub rebuild. 

12) More sanding, everything is pretty much ready for final coats of primer